Documents
Check out our White Papers, Application Notes and other documents to learn more about our product and software solutions to your test requirements.
White Papers
This document examines the growing trend towards more modular forms of instrumentation and how they may be used across multiple instrument platforms. The multi-vendor support for this trend is shown as is its application to reconfigurable and legacy applications. Ongoing activity and future directions are briefly enumerated.
| Attachment | Size |
|---|---|
| ANSI_mezzanine.pdf | 299.74 KB |
This document examines the growing trend towards more modular forms of instrumentation and how they may be used across multiple instrument platforms. The multi- vendor support for this trend is shown as is its application to reconfigurable and legacy applications. Ongoing activity and future directions are briefly enumerated.
| Attachment | Size |
|---|---|
| EE-paper-08.pdf | 294.34 KB |
C&H’s M-module instrument drivers are designed to maximize platform independence and ease of portability. This document describes the architecture used to achieve this objective and introduces the reader to the terminology used by C&H to describe the various components of M-module software.
| Attachment | Size |
|---|---|
| M_Module_Drivers_Architecture_WP.pdf | 104.3 KB |
Military and commercial Automated Test Equipment (ATE) users are facing significant problems keeping their ATE supportable for the life cycle of the products they are being used to test. Further, the cost of completely replacing the system is often insignificant compared to the cost of replicating and re-certifying the test program software. As a result, requirements have increasingly surfaced to replace legacy equipment in such a manner as to re-use existing test program software.
Read this White Paper to learn more.
| Attachment | Size |
|---|---|
| AU-082.pdf | 344.27 KB |
Application Notes
The EM405-8X101 (P/N 11029390-0001) is a 19” 1U high instrument that provides voltage monitoring and signal conditioning capabilities, such as input filtering and filtered signal output, debounce, signal stretching, level detection, and A/D conversion of a selected portion of the filtered input signal. Using ANSI Standard M-module building blocks, the EM405-8X101 integrates eight MA200 Aperture A/D M-modules fitted with AM110 Accessory Modules into an EM405-8 Ethernet M-Module Carrier. The module is an integration of several standard products as shown.
| Attachment | Size |
|---|---|
| EM405_8X101AppNot.pdf | 93.25 KB |
The EM405-8X105 (P/N 11029430-0001) is a 19” wide 1U high instrument that provides special purpose signal conditioning for low speed signals. The module has two debounce channels designed to cleanup noisy switch contact closure signals and a very versatile quad window comparator function for monitoring voltage, current, or resistance. The window comparators are isolated from logic ground to allow monitoring of floating sources, such as batteries or isolated UUT’s. The window limits operate in a fixed mode that requires no application programming or can be configured over Ethernet.
| Attachment | Size |
|---|---|
| EM405_8X105AppNot.pdf | 72.15 KB |
Config Sheets
NOTE: Unless you have Acrobat Professional installed on your computer you will not be able to save this form and email it back to us. Instead you can fill it out on your computer, print it then fax it to us at 512-733-2629
| Attachment | Size |
|---|---|
| VX405C_config.pdf | 156.46 KB |
Brochures
Take a look at our new Precise Timing and Synchronization Products Brochure.
| Attachment | Size |
|---|---|
| Precise_timing-sync.pdf | 2.73 MB |
You'll find the solutions to your Transient Data Acquisition needs in this new brochure.
| Attachment | Size |
|---|---|
| Transient_Data-20pgr.pdf | 1.68 MB |
- Login or register to post comments
Printer-friendly version
